Humidor temperature and humidity for cigar storage
Short answer: Start around 65–70°F (18–21°C) and 65–70% relative humidity in a well-sealed container or maintained humidor. A 69% humidity pack is a common starting point. Stable conditions and a reliable hygrometer matter more than an expensive wooden box.

Ideal humidor temperature and humidity
A practical starting point is about 65–70°F (18–21°C) and 65–70% relative humidity. A 69% humidity pack is a common beginner choice. These are working ranges, not exact settings that every cigar or container must share.
| Measure | Starting point | What to watch |
|---|---|---|
| Temperature | About 65–70°F (18–21°C) | Avoid sun, heaters, hot cars, and large swings |
| Relative humidity | About 65–70% RH; 69% is a common starting pack | Individual preferences and containers vary; verify the hygrometer |
| Location | A stable indoor space | A sealed box does not actively cool a hot room |
| Monitoring | Read after the container has settled | Avoid large corrections based on one reading |
Humidity-control manufacturer Boveda describes a broader 65–72% RH storage range and recommends 69% for many first-time buyers. Its temperature guidance emphasizes a stable, cool indoor environment near 70°F or below. Choose a reliable setup and observe the cigars rather than chasing every one-percent change.
How to read your humidor temperature and humidity together
Cigars exchange moisture with the surrounding air. Too little moisture can leave the wrapper brittle; too much can make the cigar feel soft and burn poorly. High temperatures increase storage risks, including tobacco-beetle activity. Relative humidity also changes with temperature, so an unstable room makes readings harder to interpret.
If the humidor reads 73°F and 69% RH, check the room and move the box somewhere cooler if the warmth persists. If it reads 67°F and 62% RH over several checks, verify the hygrometer, seal, and humidity pack before adjusting the setup. Check both readings after the container has had time to settle.
A simple beginner storage setup
- Choose a clean, odor-free airtight container or a properly seasoned wooden humidor with a dependable seal.
- Add an appropriate two-way humidity pack, sized to the container and cigar count according to its maker.
- Place a reliable digital hygrometer where you can read it without disturbing the cigars.
- Keep the container in a cool interior location away from sunlight and heat sources.
- Allow the setup and new cigars time to settle before judging a single reading or making a large adjustment.
A wooden humidor needs seasoning before use. An airtight plastic container does not need wood seasoning, but it must be clean and free from strong odors. Neither type can keep cigars cool in a hot room by itself.
Humidor troubleshooting: what to change first
The room or humidor is too hot
Move the container away from windows, appliances, and exterior walls that heat up. Check the room temperature at the warmest time of day. If the room stays hot, address the room or use storage designed for temperature control. Adding humidity does not cool cigars, and a household refrigerator is not a dependable everyday humidor.
The cigars feel dry or wrappers crack
Verify the hygrometer, container seal, humidity source, and whether a new wooden humidor was seasoned. Boveda notes that dry new cigars, too few packs, an unseasoned box, or inaccurate readings can contribute to low measured humidity. Make gradual corrections with a suitable humidity source. Do not spray or soak the cigars.
The cigars feel soft or keep burning poorly
Check whether the humidity reading is persistently above your target, confirm the instrument, and inspect for excess humidification. Correct the humidity source and give the cigars time to equilibrate. Do not bake, microwave, or leave them in direct sun to dry them quickly. Draw and burn problems can also have construction or smoking causes.
The humidity reading keeps changing
Recent opening, adding cigars, temperature shifts, and sensor placement can all affect readings. Look for a sustained pattern after the container settles. Verify the instrument before making repeated changes to the entire collection.
Do you need to hold exactly 70% humidity?
No. A stable mid-to-upper-60s setup may work well, while some smokers and containers use a higher setting. Readings and preferences differ. Do not change packs solely because one display is a percent away from an arbitrary target.
How much room should you leave?
Avoid packing cigars so tightly that they press against the humidity source or are difficult to inspect. Follow the storage and humidity-pack manufacturers' capacity guidance, and check the seal whenever adding more cigars.
How storage affects cutting and smoking
A brittle cap can crack even under a sharp blade. Excess moisture may make a cigar harder to draw or keep lit. Check storage alongside your cutting technique and lighting and smoking pace before blaming the cigar's size or blend.
Sources: Boveda storage basics, choosing a humidity level, temperature and seasonal humidity, and troubleshooting low humidity. Boveda sells humidity-control products; these references explain its guidance and are not paid endorsements.
Cigar Path does not sell tobacco or publish cigar reviews. This guide is for adults of legal tobacco-purchase age.
