Cigar ring gauge chart and calculator
Short answer: Cigar ring gauge measures diameter in sixty-fourths of an inch. A 60-ring cigar is 0.9375 inches or 23.81 mm across. Use the calculator or conversion chart for another size.

What does cigar ring gauge measure?
Ring gauge is the diameter of the cigar, not its circumference and not its length. Each ring unit equals 1/64 inch. Divide the ring number by 64 for inches, or multiply it by 0.396875 for millimeters. A 64-ring cigar is exactly one inch (25.4 mm) across.
Cigar ring gauge calculator
Enter the ring gauge printed on the box to get the cigar’s nominal diameter. The conversion chart below is also available without the calculator.
Cigar ring gauge chart: inches and millimeters
Use this chart to compare diameters. Values are calculated from the ring-gauge definition and rounded for display; actual handmade cigars may vary slightly. For length and vitola names, see cigar sizes explained.
| Ring gauge | Diameter (inches) | Diameter (mm) |
|---|---|---|
| 32 | 0.5000 | 12.70 |
| 38 | 0.5938 | 15.08 |
| 40 | 0.6250 | 15.88 |
| 42 | 0.6563 | 16.67 |
| 44 | 0.6875 | 17.46 |
| 46 | 0.7188 | 18.26 |
| 48 | 0.7500 | 19.05 |
| 50 | 0.7813 | 19.84 |
| 52 | 0.8125 | 20.64 |
| 54 | 0.8438 | 21.43 |
| 56 | 0.8750 | 22.22 |
| 60 | 0.9375 | 23.81 |
| 64 | 1.0000 | 25.40 |
| 70 | 1.0938 | 27.78 |
What is a 60 ring gauge cigar in mm?
A 60-ring cigar measures 60 ÷ 64 × 25.4 = 23.8125 mm in diameter, or approximately 23.81 mm. Its diameter in inches is 0.9375. A 50-ring cigar is about 19.84 mm, while a 32-ring cigar is 12.70 mm.
How to measure cigar length and ring gauge
- Measure across the round body of the cigar with a ruler or caliper, keeping the tool square to the cigar. Avoid squeezing the wrapper.
- Use a straight section of the body rather than a tapered tip or swollen foot. For a shaped cigar, the manufacturer's stated gauge usually refers to its widest body section.
- Multiply a measurement in inches by 64, or divide millimeters by 0.396875. For example, 20 mm ÷ 0.396875 is about 50.4, close to a 50-ring cigar.
- Treat a ruler reading as an estimate. A ring-gauge template or gentle caliper measurement is easier to read accurately, and a box-pressed cigar is not a perfect circle.
Cigar sizes are commonly written as length × ring gauge. A cigar marked 6 × 52 is six inches long and 52/64 inch (20.64 mm) across. A ring-gauge tool measures diameter; measuring the outside circumference with tape is a different measurement. Do not put a cigar into a tight hole or clamp a caliper onto it to force a reading.
Common ring gauges and size names
Slender formats often fall in the 30s or 40s; many modern cigars are around 50 to 60 or larger. Names such as Robusto and Toro describe size families rather than one fixed diameter. Compare the actual length and ring gauge on the box or product listing.
Does ring gauge change flavor or strength?
Diameter changes the room available for filler and the wrapper-to-filler proportions. Different sizes of the same series can therefore taste related without being identical. A bigger diameter does not automatically mean more strength: that depends on the tobaccos and blend. See how cigar strength differs from size.
Match the ring gauge to your cutter
Check the cutter's stated capacity before using a large-ring cigar. Forcing a thick cigar into a small opening can damage the cap. A punch, straight cutter, and V-cutter also create different openings; our cigar cutter comparison explains the tradeoffs.
Which ring gauge should a beginner choose?
Choose a comfortable mouthfeel, a manageable length, and a cutter that fits. There is no required beginner diameter. Keep storage conditions stable before comparing sizes so dryness or excess moisture does not confuse the comparison.
Reference: Cigar Aficionado’s shapes and sizes guide.
Cigar Path does not sell tobacco or publish cigar reviews. This guide is for adults of legal tobacco-purchase age.
